AUTOMATION

This tiny, 1-Wire digital temperature sensor can be connected to Fibaro Sensors to enhance their functionality. You can connect up to 4 to a Universal Sensor (up to 30m away) and up to 1 inside a Door/Window Sensor.

A small device designed to work with the Fibaro Dimmer 2; specifically for use with low energy consumption dimmable lights to prevent flickering.

The Universal Binary Sensor is a wireless module that allows you to bridge the output of any binary sensor onto the Z-Wave network and incorporate it into your Fibaro system. The module supports up to two binary sensors and four temperature sensors. The Universal Binary Sensor allows advanced users to quickly and easily incorporate alarm systems, infra-red receivers and other third-party devices into a Fibaro Z-Wave network.

The Door / Window Sensor is a battery powered reed sensor that expands the capabilities of the system by monitoring the state of doors, windows, garages and other apertures. The sensor can be used to automatically turn a light on when you enter a room, guard against unauthorised access, warn you if you leave your front door open when you leave the house or even reduce your heating bills by excluding zones with open windows from the heating programme. The Door/Window sensor includes support for an optional temperature sensor.

The Fibaro Button is a wireless, battery powered scene selector wrapped up is a small package. Fibaro Button allows multiple devices to be controlled by the use of one to six clicks or by holding the button down. that can be used in single, double or triple click functionalities. Powerfully compact and lightweight, it can be mounted anywhere on any surface quickly and easily to fit in with your household aesthetic.

The Relay Switch can be used to switch electronic devices on and off, either at will or in response to stimuli. Fibaro can use relays to turn your boiler on before you wake, ready for your morning shower, or to activate your ventilation system in response to rising humidity. Relay Switches allow the incorporation of a wide variety of electrical equipment into the Fibaro system. This model can switch a single device of up to 2.5kW load (10 Amps).

Control LED, RGB, RGBW strips and low voltage halogen lights to create beautiful, immersive lighting scenes. Fine-tune colour and brightness from the App or create preset scenes that can be called up at the touch of a button. The device provides support for up to four additional analogue sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors and light meters.

Incorporate motorised blinds, curtains, awnings and windows into your Fibaro system and make the best use of natural light. The Fibaro Roller Shutter 2 allows precise control and positioning of motorised window treatments and other features such as garage doors.

The Dual Relay Switch functions much as the Single Relay Switch, but offers extra diversity by providing switching for two separate loads of up to 1.5Kw from a single compact module.

The Dimmer two has revolutionised the smart lighting market due to its size (43 x 38 x 22mm) and exceptional functionality. This device can support up to 250W lighting without needing a neutral at the switch, able to distinguish the load via a smart algorithm it will always give you the best dimming capabilities of your chosen bulbs.

Beneath the elegant white exterior, the Flood Sensor is equipped with three ultra-sensitive 24-karat gold telescopic probes that allow the sensor to precisely measure moisture and temperature levels. Using this feedback Fibaro can detect floods and take action to isolate electrical appliances and shut off water supplies to limit damage. Thanks to advanced Z-Wave technology and a battery-operated lifespan of up to five years the water-resistant sensor can operate wirelessly from remote locations for years at a time without maintenance.

Beautifully simple. The Fibaro Wall Plug requires no specialist tools or knowledge, just take it out of the box, plug it in to a mains socket and connect any electrical device. The Wall Plug will measure the power draw of the device in real-time. View graphs and charts of the energy consumption of your home or business and identify inefficient and wasteful devices. Receive email notifications if an appliance breaks down, or remotely disable devices when you leave the building to save power.

The Smoke Sensor is a high-tech fire alarm with both photoelectric and temperature sensors for maximum protection from flaming and smouldering fires. The device features an integral 100dbm siren and an RGB visual indicator for an instant alert, but also feeds back data to the Fibaro system processor allowing it to take further actions such as closing windows to starve the fire of oxygen and illuminating the escape routes. The Smoke Sensor has a built-in Z-Wave range tester and incorporates an electronic recording device for the purposes of investigating the cause of a fire.

Control the entire house without touching anything. Fibaro Swipe allows you to make scenes activate from simple gestures. Designed to look like a picture frame, the unit can be powered either by mains via micro USB or by 4 AA batteries (included). Swipe can also be mounted under surfaces or in the wall, for control without interior design compromise. Make special scenes and add the magic to any install with the Fibaro Swipe gesture interface.

The Home Center Lite draws on the success of the Home Centre 2 to provide powerful processing in a compact package. This DIN-rail mountable processor provides fantastic functionality right out of the box and can be expanded further with the addition of extra modules and plug-ins*. The perfect solution for simple control and automation.

The Home Center 2 is the brain of the Fibaro system. The Home Centre 2 handles all of the logic and decision-making needed to manage and automate your home.