Vary the brightness of light sources in your home to create beautiful lighting effects and conserve energy. The Fibaro Dimmer is designed to be compatible with green lighting technologies such as LED and compact fluorescent lamps, and can be easily installed behind light switches and other fixtures. Fibaro allows you to create scenes that can be recalled at the touch of a button or scheduled to take place under certain conditions - such as gently lighting the way to the bathroom at night, or illuminating your driveway as you arrive home.

Building on the success of the Dimmer, the Dimmer 2 has some amazing new features – including:

• Adaptive, self-calibrating dimming (supports leading and trailing edge lamps)
• Power Metering
• 2-Wire compatible (no neutral required)
• Z-Wave 500 series chip
• Z-Wave Plus Certified
• Build-in Configuration LED
• New larger, more secure screw terminals

 

The main premise behind the Fibaro System is the possibility to install it in any house, apartment or office building, without damaging the infrastructure. We offer you full control over your house, without the need to damage walls, modify switching stations or exchange switch-keys. It is our system that adjusts to your requirements, and not the other way round. It is one of the many differences which sets us apart from our competitors.

 

3-minute installation

The installation of our devices takes about 3 minutes. All you need to do is remove a given switch (e.g. the one responsible for switching the lights on and off) from the wall, disconnect it from the wires coming out of the wall, connect the Fibaro module to the wires and reconnect the switch to the module. Next you need to screw the switch into the wall, and thus complete the process of physical installation.

Miniaturized structure

Each Fibaro System module is only 42.5 mm long, 37.0 mm wide and 15.9 mm high, which makes them the world’s smallest devices of this type. Some other advantages of the Fibaro System include neat appearance, reliability and perfection.

 

Simple and non-invasive installation

To ensure your safety, an electrician or a trained person should install the system. The picture below shows an example of the installation process for one of our products.

 

Adding a device to the Home Center

In order to complete the installation process, you need to add the installed device to the Home Center, i.e. to our automation center’s database. By putting theHome Center into listen mode and pressing the switch under which our module is located three times, you will complete the installation process. Thanks to the innovative Z-Wave technology, the Fibaro System devices can easily communicate with the Home Center, while the installation of the building automation system is easy and – more importantly – cheap.