Rako

Rako RACUB in-line RF relay module for motorised curtains, blinds and screens automated controls

£182.40 incl VAT

Rako WCM-020 Wired 2 Button Modular Control Panel

The WCM-020 connects to the RACOM wired CAT5 network pre configured for on & off

£188.40 incl VAT

Rako WCM-030 Wired 3 Button Modular Control Panel

The WCM-030 connects to the RACOM wired CAT5 network and is pre-configured for open, stop and close control for curtains, blinds & projector screens and is used with the RAK4-R.

£188.40 incl VAT

Rako WCM-060 Wired 6 Button Modular Control Panel

The WCM-060 connects to the RACOM wired CAT5 network and is pre-configured for dual open, stop and close control for curtains, blinds & projector screens and is used with the RAK4-R.

£188.40 incl VAT

Rako WCM-070 Wired 7 Button Modular Control Panel

The WCM-070 connects to the RACOM wired CAT5 network pre configured for 4 scenes, off, raise & lower

£188.40 incl VAT

Rako WCM-100 Wired 10 Button Modular Control Panel

The WCM-100 connects to the RACOM wired CAT5 network pre configured for 7 scenes, off, raise & lower

£188.40 incl VAT

Rako WAVFR Volt Free interface

The WAVFR allows mechanical switches and logic levels to add additional control of a Rako Wired system.

£192.00 incl VAT

Rako WAVMI Wired Mains Input interface

The WAVFR allows mechanical switches and logic levels to add additional control of a Rako Wired system.

£192.00 incl VAT

Rako RADMX 8 channel RF controller for DMX controlled LED, Cold Cathode and other DMX light fixtures. The unit provides the output of 8 DMX512 channels.

£195.60 incl VAT

Rako RLED150CV1 150w constant voltage dimming LED driver, suitable for ceiling or cupboard mounting.

£195.60 incl VAT

Rako RDC300 150w 12V or 300w 24V low voltage DC dimmer for tungsten halogen or constant voltage LEDs

£195.60 incl VAT

Rako RX-LINK module provides RF reception for the RAK-4 range of dimmer racks

£200.40 incl VAT

Rako RMT1200 Trailing Edge 1200W RF dimmer for tungsten, low-voltage halogen and other trailing edge dimmable loads.

£202.80 incl VAT

Rako RDL1200C Leading Edge 1200W in-line RF dimmer for Tungsten, Low Voltage Halogen and other leading edge dimmable loads

£202.80 incl VAT

Rako WA-DMX 8 channel DMX controller for use with the Rako Rakom wired network

A compact 8 channel DMX controller for use with the Rako Rakom wired network. Can be used to control DMX light fittings or interfaces such as colour changing LED drivers and fibre optic projectors.

£207.60 incl VAT

Rako WRA-232 Bridge acts as a bi-directional interface with external control devices via either serial RS232 or Ethernet.

A network interface for use with Rako wired, wireless or combined systems. The WRA-232 Bridge acts as a bi-directional interface with external control devices via either serial RS232 or Ethernet.

£207.60 incl VAT

Rako RA-BRIDGE Bridge for interfacing with wireless receivers from ethernet iPhone link

£207.60 incl VAT

Rako WA-BRIDGE Interface between wired and wireless networks with ethernet link

£273.60 incl VAT

Rako RAK-STAR Centralised Wiring Distribution Unit

£298.80 incl VAT

Rako TCM a time-clock and advanced programming module that can be connected to a RA-Bridge or a WA-Bridge

A time-clock and advanced programming module that can be connected to a RA-Bridge or a WA-Bridge converting them to RTC and WTC Bridges respectively, allowing timed events, holiday simulation and macro functions to be programmed.

£319.20 incl VAT

Rako RAK-LINK wired connection unit for use with RAK-4 systems, complete with power supply

The RAK-LINK forms the connection between RAK4 dimmers and the wired Rakom CAT5 network

£360.00 incl VAT

Rako RTC-BRIDGE Interface with wireless dimmers with Ethernet, iPhone, or Android link, fitted with TCM time clock module

Interface with wireless dimmers with Ethernet, iPhone, or Android link. Fitted with TCM time clock module allowing event timed commands, holiday simulation mode, macro & button mapping. Supplied with Rako software allowing programming & configuration of the wireless system.

£458.40 incl VAT

Rako WTC-BRIDGE Interface with wired or wireless dimmers with Ethernet, iPhone, or Android link, fitted with TCM time clock module

Interface with wired or wireless dimmers with Ethernet, iPhone, or Android link. Fitted with TCM time clock module allowing event timed commands, holiday simulation mode, macro & button mapping. Supplied with Rako software allowing programming & configuration of the system

£508.80 incl VAT

Rako RAK-4F 2400w hybrid dimmer rack for 0-10v, DSI and DALI dimmable lighting loads

£512.50 incl VAT