A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. The dimmer has four separate dimming channels that can control a total of 4800w/4000va of leading edge dimmable lighting loads. The RAK-4L requires a seperate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplate.
RAK-4L dimmer units can be used as simple 4 channel packs or joined to form multi-way stacks. 8, 12 and 16 channels stacks can be formed. All communication is carried out using the RAKOM RF, particularly useful for reducing installation and cabling costs. The RAK-4L units are designed to be centrally located in an electrical cupboard, utility room or garage. The RAK-4L leading edge dimmer can control up to 4800 watts of mains dimmable lighting loads. The hard fired Triac design provides control of a multitude of lighting loads. Microprocessor control combines smooth reliable dimming with dynamic safety features such as auto-resetting over current, temperature shutdown and voltage surge protection. The RAK-4L dimmer requires a seperate Rako RF receiver (RxLink), this unit connects using a single CAT5 RJ45 data bus. The RxLink receiver can be used to connect up to four RAK-4 dimmer units. The RAK-4L dimmer can be used seamlessley with other Rako modules, such as RDL in-line dimmers, RCP/RCM wallplates, RAH hand helds, bridge units and forms the foundation of any Rako scene-set system. Each RAK-4L box needs to be fed by a 20A Type B MCB.
