Products tagged with 'Rako'

Rako RVF-Mirrored Stainless Steel Screw-fixing cover plate for wireless modular control panel

£30.00 incl VAT

Rako RVF-White Plastic Screw-fixing cover plate for wireless modular control panel

£22.80 incl VAT

Rako RX-LINK module provides RF reception for the RAK-4 range of dimmer racks

£200.40 incl VAT

Rako TCM a time-clock and advanced programming module that can be connected to a RA-Bridge or a WA-Bridge

A time-clock and advanced programming module that can be connected to a RA-Bridge or a WA-Bridge converting them to RTC and WTC Bridges respectively, allowing timed events, holiday simulation and macro functions to be programmed.

£319.20 incl VAT

Rako WA-BRIDGE Interface between wired and wireless networks with ethernet link

£273.60 incl VAT

Rako WA-DMX 8 channel DMX controller for use with the Rako Rakom wired network

A compact 8 channel DMX controller for use with the Rako Rakom wired network. Can be used to control DMX light fittings or interfaces such as colour changing LED drivers and fibre optic projectors.

£207.60 incl VAT

Rako WAPIR ceiling mount PIR motion detector with a 360o sensor pattern

£175.20 incl VAT

Rako WAVFR Volt Free interface

The WAVFR allows mechanical switches and logic levels to add additional control of a Rako Wired system.

£192.00 incl VAT

Rako WAVMI Wired Mains Input interface

The WAVFR allows mechanical switches and logic levels to add additional control of a Rako Wired system.

£192.00 incl VAT

Rako WCM-020 Wired 2 Button Modular Control Panel

The WCM-020 connects to the RACOM wired CAT5 network pre configured for on & off

£188.40 incl VAT

Rako WCM-030 Wired 3 Button Modular Control Panel

The WCM-030 connects to the RACOM wired CAT5 network and is pre-configured for open, stop and close control for curtains, blinds & projector screens and is used with the RAK4-R.

£188.40 incl VAT

Rako WCM-060 Wired 6 Button Modular Control Panel

The WCM-060 connects to the RACOM wired CAT5 network and is pre-configured for dual open, stop and close control for curtains, blinds & projector screens and is used with the RAK4-R.

£188.40 incl VAT

Rako WCM-070 Wired 7 Button Modular Control Panel

The WCM-070 connects to the RACOM wired CAT5 network pre configured for 4 scenes, off, raise & lower

£188.40 incl VAT

Rako WCM-100 Wired 10 Button Modular Control Panel

The WCM-100 connects to the RACOM wired CAT5 network pre configured for 7 scenes, off, raise & lower

£188.40 incl VAT

Rako WLF- Black Nickel Screwless cover plate for wired modular control panel

£44.40 incl VAT

Rako WLF- Brushed Stainless Steel Screwless cover plate for wired modular control panel

£36.00 incl VAT

Rako WLF- Mirrored Stainless Steel Screwless cover plate for wired modular control panel

£44.40 incl VAT

Rako WLF- Polished Brass Screwless cover plate for wired modular control panel

£44.40 incl VAT

Rako WLF- White Plastic Screwless cover plate for wired modular control panel

£36.00 incl VAT

Rako WP-CON provides convenient connection points to the Rakom wired network for devices such as DMX, RF, WA and WTC Bridge modules.

£44.40 incl VAT

Rako WRA-232 Bridge acts as a bi-directional interface with external control devices via either serial RS232 or Ethernet.

A network interface for use with Rako wired, wireless or combined systems. The WRA-232 Bridge acts as a bi-directional interface with external control devices via either serial RS232 or Ethernet.

£207.60 incl VAT

Rako WTC-BRIDGE Interface with wired or wireless dimmers with Ethernet, iPhone, or Android link, fitted with TCM time clock module

Interface with wired or wireless dimmers with Ethernet, iPhone, or Android link. Fitted with TCM time clock module allowing event timed commands, holiday simulation mode, macro & button mapping. Supplied with Rako software allowing programming & configuration of the system

£508.80 incl VAT